 | MA-510TR Class B AIS Transponder with Wide Viewing-Angle Color TFT LCD Receiving both Class A and B AIS Signals An AIS transponder on your boat automatically receives information broadcast by other AIS-equipped vessel’s and base stations, all while your own vessel’s static and dynamic information is being transmitted. Using with an AIS transponder, you can find AIS mounted small boats and buoys that are difficult to be detected with a marine radar. The MA-510TR can receive both Class A and B AIS signals and increases your safety at sea. |
 | IC-M25 The IC-M25 is the lightest weight floating marine radio* (218 g; 7.7 oz). Its slim depth (30.5 mm, 1.2 in) can be comfortably operated with one hand. These features make it easier to equip, carry and operate for a long time. IPX7 waterproof construction (1m depth of water for 30 minutes) 4-step battery life indicator 2-step power save function Weather channel with weather alert Dual/Tri-watch functions Instant access to Ch 16 or programmable call channel Favorite channel function Monitor function opens noise squelch Auto scan function Display auto backlighting AquaQuake™ prevents audio degradation from a water-logged speaker |
 | IC-M73 The IC-M73 maintains our highest level of waterproof protection, delivering unparalleled durability. This radio has undergone rigorous testing and has proven its ability to survive being submerged in water up to a depth of 1.5 meters (4.9 feet) for 30 minutes. Low Battery Alert function notifies you of low battery level with an alarm ・ Favorite channel and tag scan functions ・ Rapid desktop charger, BC-210, and cigarette lighter cable, CP-25H, are supplied ・ Optional waterproof speaker-microphones, HM-167 and HM-202 ・ Auto power save function ・ Basic version (no voice recorder, no noise canceller and no bass boost function) available for limited markets. ・ Supports 4-digit channels ・ Monitor function ・ Lock function ・ Power Save function ・ Backlight function for night time opeartion ・ LCD contrast selection |
 | IC-M94D The IC-M94D’s 6 watts of transmit power provides extended communication range for the user. The supplied 2400 mAh (typical) high capacity Li-ion battery, BP-306 provides 10 hours of operating time, under normal conditions Integrated GPS receiver Active noise canceling technology IPX7 submersible (1 m depth of water for 30 minutes) Weather channel receive (for USA version) Dualwatch and Tri-watch functions Favorite channel function Supports 4-digit channels AquaQuake™ prevents audio degradation from a water-logged speaker |
 | IC-M804 The IC-M804 meets ITU-R M.493-15 and ETSI EN 300 338-4 Class E DSC regulations. In an emergency, by pressing the large independent Distress button, a digital Distress signal is sent with GNSS coordinates and calls for help to other ships or coast stations. 125 W (PEP) of RF output through AT-141 output power 0.5–29.999 MHz continuous receiver coverage Advanced RF direct sampling system employed 12 or 24 volt DC power source (depending on version) Programmable microphone button for quick function access |
 | IC-M803 If in an emergency situation, press the large independent Distress button to send an automated digital Distress signal. The digital distress signal with GPS coordinates calls for help from other ships or coast stations. The 4.3 inch color TFT display provides an almost 180 degree very wide viewing angle and displays high resolution characters and function icons. You can clearly see the display information from various viewing angles. So the radio can be installed without choosing the installation place. The night mode display ensures good readability in low light conditions. 150 W (PEP) of powerful RF output Optional AT-140 automatic antenna tuner IPX7 waterproof remote controller 0.5–29.999 MHz continuous receiver coverage NMEA 0183 Version 4.10 data input/output (4800–38400 bps) |
 | IC-M710 Seven characters can be programmed into each memory channel to conveniently display station names or ship names for simplified operation. A large cooling fan system, in combination with the aluminum chassis, allows conditions for transmission at a full 150 W* (PEP) RF output power—even during demanding RTTY (radio teletype) operation. ・ General coverage receiver ・ Terminals for frequency/mode control via NMEA interfacing ・ Automatic tuning function ・ Large, front-mounted speaker ・ Weather fax ready ・ Backlight control ・ CW full break-in and semi break-in ・ 2-tone alarm built-in (Optional depending on version) ・ 1136 channels available |
 | IC-M700PRO Channel selection is quick and easy to access with large, independent Group and Channel knobs. Each panel button has only 1 function. The large easy to read display shows channel (or frequency) and operating status at a glance. The powerful 150 W* (PEP) transmitter provides long distance communication, and ensures that power is always available to you-even during demanding RTTY (radio teletype) or e-mail operation. Optional automatic antenna tuner, AT-140/AT-130, matches the radio to your antenna ・ 0.5 to 29.9999 MHz wide band general coverage receive ・ Channel knob allows the user to tune specific frequencies around a memory channel ・ 2 DIN connectors for external equipment connection-linear amplifier, FSK terminal, e-mail modem, etc. ・ 2-tone alarm built-in (Optional depending on version) ・ NMEA 0183 interface included |
 | GM800 The GM800 meets the GMDSS (Global Maritime Distress and Safety System) MF/HF radio requirements as required for SOLAS regulated commercial vessels engaging in international voyage. The radio meets the MED, “wheel mark” requirements for European merchant ships. The GM800 has passed rigorous environmental testing and quality assurance processes. The radio is designed to provide reliable operation and long-lasting durability under harsh maritime environments. In fact, the controller has IPX7 protection (1 m depth of water for 30 minutes). Remote Distress alarm Printer connector (Centronics IEEE1284) IEC 61162-1 interface for GNSS receiver Output power: 150 W* PEP into 50 Ω (at radio terminal) Built-in 24 V DC-DC converter |
 | MR-1010RII The simplified ARPA function helps to prevent a collision risk with other vessels or objects. Up to five targets can be automatically tracked on the radar echo, when a target enters within the set watch area, (or up to ten targets can be tracked when manually set). By selecting one of the targets, the target information such as position, course, speed, CPA, TCPA, bearing, and distance is shown on the lower side of the display. When the target enters within the CPA and TCPA limits, an alarm message is displayed with a beep alarm. When connected to a DSC radio and a DSC call is received, the received message is transferred to the MR-1010RII. Up to 20 DSC messages can be plotted on the radar echo. If a MOB position information is transmitted from a DSC handheld transceiver (including Icom IC-M94D), the MR-1010RII can show the MOB waypoint on the radar echo to assist in search and rescue operation. 10.2–42 V wide DC input to prevent over voltage damage ・ Two user programmable alarm zones ・ Waypoint indication* ・ Designed, engineered and Made in Japan |
